Hello.

I am in need of this printing:
https://www.printables.com/model/1617277-m5stack-tab5-back-cover-with-sliding-storage-compa

Ideally not black if possible.

Thanks.

After several years, my printer guy ended up closing shop, so now I'm looking for another longterm printer. I get 5-20 prints done every few months, so you have to be able to keep up with demand.

Also, I use a particular scaling formula so you have to be able to resize the prints to my specifications. Honestly, most of the time I'll just say something like, "X needs to be 35mm tall."

Most STLs are 1"-5" tall but sometimes there are buildings and on rare occasions the models are giant (20" or more) and need slicing up to print. The smaller figures must be done in resin without lines. I understand that FDM printers are going to have lines, which is fine since that's almost always terrain pieces anyway.

I can pay by PayPal or Venmo.

I am looking for someone who could print and ship bits for miniature wargaming. I will leave the material to the seller's discretion on what keeps the most detail while still being durable. Preferably, I would like my bits to be printed with tough, high-quality resin.

Hi all, I apologize if this isn’t the right place for this. However, I am trying to make Dr. Frankenwagon’s monster from Monster Truck Mater for my son.

So far, I’ve been able to make some decent progress piecing together toys from garage sales and Goodwill but am struggling with his head.

Is this something someone is willing to work with me on? I feel like 3D printing might be the way to go on this but am open to suggestions.

I already have the STL files, it comes in 3 pieces. I would prefer a print in PETG but am flexible. Ideal timeline would be before Oct 31 but if that's not doable then by Nov 5. I'm based in Los Angeles.

4 pieces, I have the stl files for each.

https://makerworld.com/en/models/1996826-mileseey-genepro-g1-rangefinder-magnetic-case#profileId-2149567

From the creator:

This is printed in two parts. The inner sleeve from TPU and the outer case from PLA or PETG.  Cap and “lanyard” are TPU as well.  The bottom allows for some debris, moisture to escape. 

If anyone in LA is willing to print me a small item (CW Kid Flash emblem), please message me! I do have the STL files for this item! I am flexible on how much the cost would be. I need to have this item by the 30th of October. Any help in references of places that do hobbyist and small prints for reasonable prices would be very helpful as well. All the places near me in Burbank print mostly for studios and commercial business. They all told me they do a minimum between $200-$250.

I’m looking to have a grip made for my New Nintendo 3DS XL and am hoping to find someone who can produce a high-quality print with a smooth, clean finish and consistent texture throughout with a Matte Black color.

I’d like to minimize visible layer lines, rough edges, blobs, and other printing imperfections as much as possible. I’m willing to pay extra for a really nice result, including any additional finishing work needed to achieve a clean, professional appearance.

Model: https://www.printables.com/model/429273-grip-stand-for-new-3ds-xl

Please comment or DM me if you’re interested!

Hi everyone!

I’m an independent designer based in London, developing a custom 3D-printed shoe for my footwear project.

I’m looking for an individual or studio who can help manufacture an initial wearable prototype at a reasonable cost.

Requirements:

Entire shoe printed as one continuous piece
Flexible TPU, foaming TPU or another suitable elastomer
Properly cushioned, wearable sole — not just a visual prototype

Durable enough for everyday walking

Exact exterior design must be preserved

Approximately EU 46 / UK 10

Ideally London or UK-based, but open to international options

I’m working on the CAD model and can provide references and dimensions.

I’m particularly interested in hearing from anyone who has successfully printed complete, comfortable shoes, or knows a service that offers this.

Looking to start with one shoe for testing before moving to a full pair and potentially small-batch production.

Any recommendations, approximate costs or advice would be hugely appreciated!

Thanks!

Hi, looking for an experienced 3d printer based in the UK who can print me off something that I will supply the .stl file for.

Hey guys! I’m looking to get someone to print 3 super small drone parts. A camera mount, arm bumpers, and another small little mount.

Here are the files to each.

Camera mount https://www.printables.com/model/833046-kayoumini-25-tpu-collection/files#preview.file.gOgXr

Arm bumpers (need 4) https://www.printables.com/model/833046-kayoumini-25-tpu-collection/files#preview.file.QWQsG

Another mount https://www.printables.com/model/833046-kayoumini-25-tpu-collection/files#preview.file.5WbUr

I designed this help drain an inflatable bathtub, i tried to use shapeways and some other sites, but the dimensions seem to be screwed up on the schematic anytime i try to export it. Can anybody help me figure out whats wrong or possibly print this for me? It can just be the cheapest material but would need to be ok getting wet.

I found these on Etsy, but the seller doesn’t ship to the US. https://www.etsy.com/listing/1635638320/billy-shelf-hook-set-of-4-pieces?ref=share_ios_native_control

I need 2 Gridfinity baseplates and 13 boxes, for which the files are here:

https://drive.google.com/drive/folders/1WxgeavuNBheE7bxvoGvhNA7mmw4llM2g?usp=drive_link

Would like them printed in black. I don't mind if the baseplates need to be broken up for printing, and would be fine receiving them in multiple pieces and gluing them together myself!

Looking to get No Sensor with Tall Trays printed. I don’t need plate 8 or 9. Color doesn’t matter, whatever is cheapest and shiniest (nothing matte) lol. Link: https://makerworld.com/en/models/655665-mealworm-farm-large#profileId-582671

I'll provide the STL files, but these would be the parts and dimensions

- (8) Corner Brackets (35 x 69.5 x 69.5 mm)

- (4) L Brackets (180 x 37.5 x 37.5 mm)

- (5) PC fan covers (145 x 145 x 10 mm)

- (5) PC fan gaskets (141 x 141 x 2 mm)

20% infill PLA, and black or any shade of grey filament is fine, other colors potentially ok too just lmk what you have.

Ideally looking for local pickup in northern-ish chicago region (between like the loop and evanston), but shipping is also fine, please send me a DM with an approximate time and price if you're interested, thanks!

I slightly edited the fan gasket file but here's the project I'm making for reference on what the parts should look like overall

Hi all,

I’m hoping to get this case from Printables for an AMD BC-250 printed.

I’m more than happy with the white, black, and translucent purple in the listing for colors.

As far as materials or infill… I’m a complete noob. I just want the thing to support the parts, and not break when I pick it up set it down. So I’m open to suggestions.

Thank you!

Repo and files are here: https://github.com/MartijndenHoed/Diptyx/tree/main/3d-models/cases

Im looking for a couple of quotes on making a custom outer case for the Diptyx ebook reader. It might lead to more commissions if it works out. Just the outer case, no buttons or any other parts at the moment.

Diptyx open source ebook reader: https://diptyx.dev/

Image of the case. You can see its a black case by default. Thats the part I want to replace. Ive already taken it apart a couple of times. https://diptyx.dev/images_new/angled_view.JPG

Edit: Thanks everyone, im responding now.

Files are here: https://github.com/MartijndenHoed/Diptyx/tree/main/3d-models/enclosure

To start out with im looking for: left_cover right_cover

But if this works out theres a number of orders for myself and others that I want to do.

Thanks!

Hey everyone, my wife's cousin had open heart surgery and is looking to do her first 5k since the surgery. It's such a simple design but I don't have the bandwidth to piece this together.

Willing to tip a couple bucks. This is supposed to mimic a racing medal, so she drew a line between the heart so you could tie a ribbon or something there.

Hi r/3DPRINTMYTHING people!

I am looking for someone to both 3D model and print a custom friction-fit sheath for a Cutco Cheese Knife. Are you that someone?

Here is a link for reference:https://www.cutco.com/p/cheese-knife&sr=sid-7140865-ap-2

Material: PETG or ABS is preferred (no standard PLA, please).

Color: any color will do! It will only be used while stowed away in a drawer.

It will be very unlikely that someone will have this exact model of knife on hand, so I am happy to provide exact measurements, top-down reference photos with a ruler to help you build the model. Please let me know what format works best for your workflow.

If you can handle both the 3D modeling and the physical printing, please send over a quote including shipping to San Diego. This would be so cool, thanks!

Hey all,

Looking for a resin print of this goblin mini, but scaled up to make the character maybe 3.5-4" tall.

https://www.myminifactory.com/object/3d-print-nip-the-goblin-fighter-female-goblin-fighter-goblin-warrior-with-greatsword-839373

It's typically a tabletop mini, but I don't play anymore, just want to paint as a display piece.

Based in Lincs, UK. So if you're nearby I can collect.

Thanks!

dm me for the zip file I am looking for a quote I can also put on fewer plates if neccesary.